A Guide to Vehicle Wrap Installation
Many people don’t know much about vehicle wraps and their installation. If you want to learn about vehicle wraps and their installation, then this article is for you. Here, then, is a discussion about vehicle wraps and how to install them.
It is not difficult to know wrap a vehicle wrap is and it is simply a special material used to wrap a vehicle around. You can wrap your vehicle with material with graphics or custom are work on it. You can do this instead of custom painting your car and this is more affordable and is of high quality. The good thing about vehicle wraps is that you can remove it if its purpose has already been accomplished. This is best if you are leasing a vehicle.
If you are going to wrap your vehicle, then you need to choose a good material for it. We will discuss the two common materials used for vehicle wraps below. You choose a material depending on your budget and the needs of your project. Here are the two materials you can use and why you should choose it over the other.
Vehicle wraps are installed for the purpose of mimicking the look of a custom paint job without having to actually painting it. One type of material used in vehicle wraps is cast film. If you use cast film, you accomplish this very well, that is, it will truly look like a custom paint job. The material used to make the wrap has an inherent ability to conform to or mold to the shape of the vehicle being wrapped. It gives your vehicle a painted look because it is 2mm thick. This type of material is also extremely durable and lasts up to five years. However, the price of cast film is higher than the other materials used for vehicle wraps.
The other material used in car wraps is vinyl. The use of vinyl is for individual graphics and not for full vehicle wrap. Vinyl wraps are cheaper than the rest. This may be for people on a budget. It you use this wrap, you will have a problem with durability and it can have aesthetic abnormalities. Though not a long term solution, it can still do a good job.
The first thing to do before applying the wrap is to clean your car’s exterior. All waxes and other substances should be removed so that the wrap will stick. There is a need for optimal temperature for easily wrap installation. If you are using vinyl wrap, place the material where you want it and then tape it down first with masking tape. With a squeegee, apply the vinyl before removing the tape. If you want to release air bubbles trapped inside, you need to use an air release tool. If a full vehicle wrap, you need a very sharp blade for cutting and trimming around door handles, wheel wells, etc. It is fun to do a vehicle wrap DIY project.